House Digital TV Antenna Rewire Kit
4 way splitter
Rubber boot
Pixceliation pic 1
pixceliation pic 3
pixceliation pic 2
1200mm fly lead
TVREWIRE Kit label
Wire kit package

House Digital TV Antenna Rewire Kit with a 4-way splitter, 4 Wall and 4 skirting board fittings plus 100 Metres of RG6 Quad cable, 2 Fly Leads and 10 “F” Connectors.

$228.49

House Digital TV Antenna Rewire Kit with a 4-way splitter, 4 Wall and 4 skirting board fittings plus 100 metres of RG6 Quad cable, 2 Flyleads and 10 “F” connectors

Part Number: TVREWIRE-P

Inquire Now
Contact Us
Name
Name
Inquiry/Shipping Address
Brand:

Description

House Digital TV Antenna Rewire Kit with a 4 way splitter, 4 Wall and 4 skirting board fittings plus 100 metres of RG6 Quad cable, 2 Flyleads and 10 “F” connectors, SAVE MONEY and cable your own home or fix that TV Picture Pixilation problem with this complete Digital TV Antenna Rewire Kit. 

House Digital TV Antenna Rewire Kit, No special tools are a required for fitting cables. (Note: Running the cable down inside a wall depending n wall construction may require special tools for drilling through a noggin or wall plate.)

  • Connections and poor-quality cables account for a large percentage of picture problems.
  • The use of old poorly shielded cables and antenna points, adaptors, poor quality short cables (fly leads) all-cause pixilation.
  • The reason is the shield which is VERY IMPORTANT when dealing with digital signals is damaged or in the case of poor cables non-existent.
  • In one simple kit, you have 100 metres of new quad shielded cable you can install from your antenna to up to 4 new outlets, (your choice of wall or skirting board connections as both are  supplied) plus 2 new fly leads. Extra flyleads are available see our cables section.

 

Specifications

Specifications:

  • All Fittings are Digital standard “F” connector fittings.
  • Commercial Grade RG6 Quad Shielded UV stabilised low loss Coaxial Cable.
  • Commercial grade handmade flyleads.
  • Standard Plaster Clips – zinc plated.
  • 4-way splitter – “F” connector with all ports power passing and diode protected.

Parts Included:

Parts Included:

  • 1x 4-way splitter – “F” connector with all ports power passing and diode protected.
  • 4 x Wall Plate F connector fitting including Plaster Clip.
  • 4 x Skirting/Architrave fitting.
  • 2 × 1.2 Metre Flylead with a Right-Angle F connector and 1 x Pal fitting.
  • 100 Metres RG6 Quad shielded cable.
  • 10 x RG6 Quad cable Twist on F connectors.
  • 1 x F connector Cable Boot (for the Antenna connection).
  • Fitting Instructions.

Additional information

Weight 5.8 kg
Dimensions 32 × 23.0 × 29 cm